Please do not put your wireless outside sensor in direct sunlight or rain to affect its accurate.
How to keep weather station stay on all the time?
1>Please make sure your weather thermometer is powered by DC adapter and remove battery at first.
2>Press “SIXTH” button beside the indoor thermometer to make your weather station stay on all the time.
3>If the wireless weather station turn off after 15s, please repeat step 2.
How to Choose Time Zone and Adjust the Time Automatically?
1)Press and hold the 1st button beside weather station to enter 24/12 hrs setting, if you do not need to set this, just press first button again to enter time zone setting.
2) Press “DOWN” button beside the weather thermometer to set the number ( the thermometer has four time zones: -8PST, -7MST,-6CST,-5EST.
Then leave it alone about 5s until weather station back to time display.
3) After choosing your time zone, you can press and hold down the “UP” button for 5 seconds to manually start the WWVB searching.
The time and date will be automatically set.
( The weather station automatically stats the WWVB Signal search up to 7 minutes of any restart or change batteries.
Funk range: 60 m/200ft (open area)
Indoor thermometer dimension: 8L X 5.1H inches
Outdoor Thermometer dimension: 1.9L X 3.7H inches
Measuring range (inside temperature): -9.9℃(14.2°F) – 50°C(122°F)
Measurement range (outside temperature): -20°C(-4°F) – 60°C(140°F)
Hygrometer inside: 20-95%
Hygrometer outside: 20-95%
Power Type Indoor Station: 2x AA (not included); DC Charger (included)
Battery Type Outdoor Sensor: 2x AA (not included)
Power consumption of base station (mains operation): 0.2W